Siffar, Flat, Square, Zagaye, Fine, Plated and Bare Waya ASTM A167, AMS 5523
Aikace-aikace
Kayan wuta
Masu musayar zafi
Kayan Aikin Takarda
Abubuwan da ake fitarwa a cikin Turbin Gas
Sassan Injin Jet
Kayan Aikin Matatar Mai
Ilimin Halitta
Carbon | 0.080 max |
Manganese | 2.00 max |
Siliki | 0.75 max |
Chromium | 24.00-26.00 |
Nickel | 19.00-22.00 |
Molybdenum | 0.75 max |
Phosphorus | 0.040 max |
Abubuwan Jiki
Yawan yawa | 0.29 lbs/a cikin³ 9.01 g/cm³ |
Resistivity na Lantarki | microhm-in (microhm-cm) |
68°F (20°C) | 37.0 (94.0) |
Takamaiman Zafi | BTU/lb/°F (kJ/kg•K) |
32-212°F (0-100°C) | 0.12 (0.50) |
Thermal Conductivity | BTU/hr/ft²/ft/°F (W/m•K) |
Tanda zuwa 212°F (100°C) | 8.0 (13.8) |
932°F (500°C) | 10.8 (18.7) |
Ma'anar Ƙwararren Ƙwararren Ƙwararrun Ƙwararru na Thermal | in/a/°F (μm/m•K) |
32-212°F (0-100°C) | 8.0 x 10 (14.4) |
32-600F (0-315°C) | 9.3 x 10 (16.7) |
32-1000F (0-538°C) | 9.6 x 10 (17.3) |
32-1200F (0-649°C) | 9.7x 10 (17.5) |
Modulus na Elasticity | KSI (MPa) 29.0 x 10³ (200 x 10³) a cikin tashin hankali 11.2 x 10³ (78 x 10³) a cikin torsion |
Halin Magnetic | H = 200 Oersteds |
Annealed | <1.02 max |
Rawan narkewa | °F (°C) 2550 - 2650 (1399 - 1454) |
Kayayyakin Injini
Kayayyakin Injini A Yanayin Zazzabi
DUKIYA | ANYI LABARI |
Ƙarfin Ƙarfin Ƙarfi | 75 KSI min (515 MPA min) |
Ƙarfin Haɓaka (0.2%) | 30 KSI min (minti 205 MPA) |
Tsawaitawa | 40% min Hardness Rb 95 max |
Kayayyaki | Tempered 310S za a iya kawota a cikin yanayi daban-daban birgima. |
Tuntuɓi sabis na fasaha na Ulbrich don cikakkun bayanai.
Juriya na Lalata
Koma zuwa NACE (Ƙungiyar Injiniyoyin Lalata na Ƙasa) don shawarwari.
Properties Tempered Alloy 310S na iya zama sanyi birgima don cimma kaddarorin zafin da ake buƙata ta takamaiman abokan ciniki da/ko buƙatun masana'antu. Tuntuɓi Ulbrich Wire don cikakkun bayanai.
Siffofin
Ci gaba da Coils Yanke zuwa tsayi Daidaitaccen yankan
Cold Forming Alloy 310S yana da kyau ductility kuma za a iya birgima kafa, hatimi da kuma zana a shirye.
Maganin zafi Alloy 310S za a iya taurare kawai ta aikin sanyi.
Welding Don kyakkyawan sakamako duba: SSINA's “Welding of Stainless Steels and Other Joining
Hanyoyin".
Ƙayyadaddun Alhaki da Ƙarfafa Garanti: Babu wani abu da Ulbrich Bakin Karfe da Ƙarfe na Musamman, Inc., za su kasance masu alhakin duk wani lahani da ya taso daga amfani da bayanan da ke cikin wannan takarda ko kuma ya dace da 'aikace-aikacen' da aka lura. Mun yi imanin bayanan da bayanan da aka bayar sun yi daidai ga mafi kyawun iliminmu amma, duk bayanan ana ɗaukar dabi'u na yau da kullun kawai. An yi niyya don tunani da cikakkun bayanai kuma ba a ba da shawarar ba don takamaiman aiki, ƙira ko dalilai na injiniya. Ulbrich ba ya ɗaukar wani fayyace ko bayyana garanti dangane da ƙirƙira ko daidaiton bayanan da aka bayar a cikin wannan takaddar.